Before					After			Savings
Length		Existing Lamp type	Lamp Wattage	Total Wattage Inc Switchstart Ballast	New Lamp Type	Lamp Wattage	Total Wattage Inc Save It Easy Ballast	Watts	Carbon	%	Save It Easy Part Number
2ft	590mm	T8	18W	27W	T5	8.5W	11W	16W	22KgCO2	59%	PRO-2-11
2ft	590mm	T12	20W	31W	T5	8.5W	11W	20W	28KgCO2	65%	PRO-2-11
2ft	590mm	T8	18W	27W	T5	14W	16W	11W	15KgCO2	41%	PRO-2-16
2ft	590mm	T12	20W	31W	T5	14W	16W	15W	20KgCO2	48%	PRO-2-16
4ft	1200mm	T8	36W	46W	T5	21W	24W	22W	29KgCO2	48%	PRO-4-24
4ft	1200mm	T12	40W	50W	T5	21W	24W	26W	35KgCO2	52%	PRO-4-24
4ft	1200mm	T8	36W	46W	T5	24W	28W	18W	24KgCO2	39%	PRO-4-28
4ft	1200mm	T12	40W	50W	T5	24W	28W	22W	29KgCO2	44%	PRO-4-28
5ft	1500mm	T8	58W	71W	T5	28W	31W	40W	53KgCO2	56%	PRO-5-31
5ft	1500mm	T12	65W	78W	T5	28W	31W	47W	63KgCO2	60%	PRO-5-31
5ft	1500mm	T8	58W	71W	T5	32.5W	36W	35W	47KgCO2	49%	PRO-5-36
5ft	1500mm	T12	65W	78W	T5	32.5W	36W	42W	58KgCO2	54%	PRO-5-36
5ft	1500mm	T8	58W	71W	T5	35W	39W	32W	43KgCO2	45%	PRO-5-39
5ft	1500mm	T12	65W	78W	T5	35W	39W	39W	52KgCO2	50%	PRO-5-39
6ft	1800mm	T8	70W	84W	T5	48W	53W	31W	43KgCO2	37%	PRO-6-52
6ft	1800mm	T12	75W	95W	T5	49W	53W	42W	58KgCO2	44%	PRO-6-52
8ft	2400mm	T12	125W	175W	T8	70W	77W	98W	137KgCO2	56%	SET-240-070-T8A

New Products
Product Type	Existing Lamp type	Lamp Wattage	Total Wattage Inc Switchstart Ballast	New Lamp Type	Lamp Wattage	Total Wattage Inc	Savings Watts	Savings Carbon	%	Part Number
2D	2D	28W	34W	LED	12W	12W	22W	30KgCO2	65%	2LED 12W CW 4*
GU10/MR16	GU10	50W	50W	LED	5W	5W	45W	63KgCO2	90%	LED 5W CW GU10/MR16*
PL	PL	14W	14W	LED	5W	5W	9W	13KgCO2	64%	LED PLL 5W CW*

* Warm White options also available ( 4 pin option for 2D lamp replacement also available).

Case Study

West Sussex County Council

County Council extends low-energy lighting roll-out and saves 389 tonnes of CO2`

T5 Energy Savings Tables

Our table above shows the before and after T5 Retrofit configuration for standard Switchstart ballasts. Switchstart ballasts are used in the majority of the UK market and conversion to energy saving lighting is as easy as plug and play.

How can I identify my fitting as a Switchstart ballast type?
Two easy ways to identify your Switchstart fitting is to check there is a small starter being used and when the fitting is switched on from cold the lamp often flickers.

How can I identify my fitting as a Electronic ballast type?
Electronic ballasts come in two formats; Quick/Rapid start and High Frequency. Both types of fittings do not have a starter but
Quick/Rapid fittings flicker when switched on whereas a High Frequency fitting will not flicker.

Quick/Rapid start and High Frequency fittings have different energy savings to Switchstart but still provide good payback
(examples shown on our Conversion Strategy Chart).

Our Clients' Savings

Before

After

Savings

New Products

Case Study

West Sussex County Council

T5 Energy Savings Tables